PVC Biaxial Shrink Film

Max. TD Shrinkage: 53%
Max. TD Shrinkage: 40%
Thickness: 20~80 micron
Width: 100mm ~1,400 mm
Roll Length: ≤ 5,000 m
Density: 1.38 g/cm³

The film has been used for many well-known brands such as Master Kong, Dannon, PepsiCo, Uni-President.
The label film is adaptable for Gravure and Flexo printing. The shrink sleeves are widely used for special plastic containers, glass containers, paper containers and other bottles.


Water , Tea, Milk, Yogurt, Juice Drinks,Soft Drinks, Energy Drinks, Alcoholic Drinks, Wine caps



– Film roll without ribs, fewer fish eye, no loosen edges
Good transparency and lay-flatness
Good printing performance and ink adhesion
Suitable for 280 meters/minute high speed printing machine
Applicable to the packaging of special containers with prominent product designs
Advanced PVC film production lines with up-rotating blown technology to keep good flatness and linearity
Print at 8~12 colors and can reverse print 1-2 more colors

Technical Information
Test Standard
Width(mm) ≤1200 Enterprise standard  
Thickness(µm) 32-75 ASTM D374
Roll Length(m) ≤ 5000 Enterprise standard  
Thermal Shrinkage(%) TD:   Low        48~50
        Medium  50~52
        High       52~54
MD:  0-3
ASTM D1204(in 90℃water x 10 sec.)
Tensile Strength(Mpa) TD: ≥ 50
MD: ≥42
Tear Strength(Mpa)
TD: ≥ 45
MD: ≥60
ASTM D1004
Elongation at Break(%) TD: ≥50
MD: ≥70
C.O.F(µs/µk) 0.15≤C.O.F.≤0.55 ASTM D1894E
Dyne(mN/m) 38 ASTM D2578
Haze(%) ≤5.0 ASTM D1003
Density(g/cm³) 1.38 ASTM D792
The data herein is measured on products which are reliable yet not guarantee value.


Shrinkage Curve