English

Blown PVC Shrink Sleeve Label Film

Max. TD Shrinkage: 53%
MD Shrinkage: < 3%
Thickness: 20~80 micron
Width: ≤1,400 mm
Roll Length: ≤ 5,000 m
Density: 1.38 g/cm³
Description

The film has been used for many well-known brands such as Master Kong, Dannon, PepsiCo, Uni-President.
The label film is adaptable for Gravure and Flexo printing. The shrink sleeves are widely used for special plastic containers, glass containers, paper containers and other bottles.

Application

Water , Tea, Milk, Yogurt, Juice Drinks,Soft Drinks, Energy Drinks, Alcoholic Drinks, Wine caps

 

Feature

– Film roll without ribs, fewer fish eye, no loosen edges
Good transparency and lay-flatness
Good printing performance and ink adhesion
Suitable for 280 meters/minute high speed printing machine
Applicable to the packaging of special containers with prominent product designs
Advanced PVC film production lines with up-rotating blown technology to keep good flatness and linearity
Print at 8~12 colors and can reverse print 1-2 more colors

Technical Information
指标
Specifications

Test Results
单位
Unit
测量方法
Test Methods
宽度 Width 1400 mm Enterprise standard  
厚度 Thickness 20-80 µm ASTM D374
卷长 Roll Length 5000 m Enterprise standard  
收缩率 Shrinkage TD:  47-53
MD: 0-3
% ASTM D1204
(in 90 water x 10 sec.)
拉伸强度 Tensile Strength TD: 50
MD: 42
Mpa ASTM D882
断裂伸长率 Elongation at Break TD:  50
MD: 70
% ASTM D882
摩擦系数 C.O.F(µs/µk) 0.15C.O.F.0.55 -- ASTM D1894E
表面张力 Dyne 38 mN/m ASTM D2578
雾度 Haze 5.0 % ASTM D1003
密度 Density 1.38 g/cm³ ASTM D792
*以上数据为产品实测值,并非保证值。如需了解详细信息请与本公司联系。
The data herein is measured on products which are reliable yet not guarantee value.

     

Shrinkage Curve

 

Review